Oil boilers are a common choice for residential and commercial heating applications, especially in locations where natural gas is not an option. They can provide a steady, consistent level of heat even when temperatures outside are very cold. Peerless oil boilers are relatively inexpensive to install, require little maintenance, and can provide an efficient and affordable way to heat homes and buildings. Nonetheless, as with any heating system, oil boilers can also encounter frequent issues with prolonged use. Don’t worry, this helpful guide will provide an overview of the five most common issues that homeowners face with their oil boilers, along with tips on how to address them.
Top 5 Common Problems With Oil Boilers And Their Solutions:
1. Ignition System Issues:
Ignition problems are probably the most common problem encountered with oil boilers. A faulty ignition switch or a clogged fuel line could be the cause of the boiler not turning on or heating up.
What should you do?
- Begin by checking the oil tank to ensure that it has enough fuel. If the tank is full, verify that the ignition switch is on. If the boiler still won’t start, inspect the fuel line for blockages or dirt.
- If any obstructions are found, delicately remove them with a clean cloth or brush. If the boiler is still not working, contact a professional for further assistance. You should also check the pilot light and thermocouple, and clean or replace them if they are dirty or faulty.
- Electrical wiring should also be examined to make sure it is installed properly.
2. A Faulty Heating System
If you find that your home is not getting as warm or taking longer to heat up, it could be an indication of a problem with your heating system. This could be caused by a clogged filter, a blocked nozzle, or a malfunctioning fuel pump. Other causes for this issue include a faulty fuel pump, low water pressure, or a faulty thermostat.
How To Resolve:
Cleaning the filter and nozzle and checking the fuel pump can help to resolve this issue. If these steps don’t work, it may be necessary to call a professional to diagnose the problem and make repairs.
|
3. The Oil Boiler Keeps Kicking Off
A common issue with oil boilers is that they tend to shut off on their own. The reasons for this can include preheating water, a malfunctioning temperature control valve, thermostat inaccuracies, faulty heat exchangers, water pump issues, fuel supply interruptions, and a frozen condensate pipe. If these issues are not addressed, the boiler can be damaged and cause costly repairs. Regular maintenance and inspection of the boiler can help to detect and prevent these problems. It is important to have a professional technician inspect the peerless boiler parts on a regular basis.
4. Noisy Boilers:
Boilers that are not properly maintained or serviced can become noisy as the parts such as the fan, motor, or pump wear out over time. This is usually caused by the malfunctioning control valve, or sludge deposits built-up on the heat exchanger. If the boiler is too noisy, it can be disruptive, making it difficult to concentrate. If left untreated, it can lead to further damage to the boiler and should be addressed immediately and should be serviced by a qualified technician.
5. Dangerous Gas Leaks:
Carbon monoxide leaks are one of the most common problems with oil boilers. Carbon monoxide is an odorless and colorless gas that can be deadly if inhaled. Signs of a carbon monoxide leak include yellow or orange flames instead of blue flames in the boiler and sooty deposits around the boiler. If you suspect a carbon monoxide leak, it is important to shut off the boiler and call a qualified technician for peerless oil boiler repairs.